FAQ
166 entries found.Is the AS-Interface cable (yellow and black) silicone-free ? |
||
|
How do you exchange data via Profibus DP between a Moeller PLC with a CM4-504/LE4-504/PS416-NET-441 and a Siemens S7/C7? |
||
|
How can you display I/O status information and other modules in the DP Configurator, and how do you force the outputs? |
||
|
How do you implement a telecontrol connection between an analog modem and an ISDN modem ? |
||
|
What is the pin assignment of the KPG3-PS3 cable ? |
||
|
How can you connect a PROFIBUS-DP master and a PROFIBUS-DP slave to the PS4-341-MM1 together? |
||
|
How much data can a PS416-NET-440 Profibus DP master card send to each station and how much can it receive ? |
||
|
What is the current hardware version of the PS3AC and PS3DC ? |
||
|
How is the Merten EIB Gateway integrated for Suconet K1 using S40? |
||
|
What earth cable is recommended for Suconet K? |
||
|
What temperature monitoring options are available with the PS4 / PS416 system? |
||
|
On which PC operating systems does the PROFIBUS-FMS Configurator run ? |
||
|
Does the Moeller automation product range include an SSI interface for absolute positioning encoders ? |
||
|
Is there a toolbox or function block for positioning, such as for controlling servo motors or frequency inverters with a +/-10V analog input? |
||
|
Is there a German version of the Profibus DP Configurator ? |
||
|
Can the COBOX be connected via the screw terminals? |
||
|
How can consistent data be received with a Profibus DP master? |
||
|
Is it possible to use the DE4-NET-K network module with DF4-120 frequency inverters ? |
||
|
How can you prepare your own Suconet K/K1 cable ? |
||
|
How can closed-loop control tasks be implemented with the PS4/PS416 PLC systems ? |
||
|
How can the PS4/PS416 system receive and evaluate the DCF77 radio time signal ? |
||
|
How do you implement communication with PS4/PS416 programmable controllers via TCP/IP on Ethernet |
||
|
What cable can be used for PROFIBUS-DP ? |
||
|
Is it possible to carry out remote diagnostics for the PS4/PS416 system ? |
||
|
Is the AS-Interface flat cable halogen-free ? |
||
|
Is it possible to run a Suconet K2 line with the PS416 ? |
||
|
How can I send and receive SMS messages with the PS4/PS416 system? |
||
|
Do the PS4 compact PLCs have a MODBUS/JBUS interface ? |
||
|
How can large volumes of data be transferred via Suconet K or PROFIBUS-DP ? |
||
|
How can you expand an AS-Interface network ? |
||
|
Is it possible to mix the operation of AS-Interface slaves to specification 2.0 and 2.1 on the same line ? |
||
|
Do AS-Interface applications require the use of a special AS-Interface power supply unit ? |
||
|
What type of leased line network is possible with telecontrol applications ? |
||
|
Which marker ranges (PS4-200, PS4-341 and PS416) can be called by the APP-RECORDER ? |
||
|
Is there a currently valid PLC approval table for the world market ? |
||
|
Are the AS-i modules from the EM2 series still available? |
||
|
Is there a data multiplexer for Suconet-K / PROFIBUS-DP ? |
||
|
Is it possible to send a wireless status or fault message from a PS4 compact PLC? |
||
|
Which PS4 type can be equipped with the PROFIBUS-DP master module ? |
||
|
Which PLC types from the PS4 series are approved ? |
||
|
Is there a PLC approval table for the shipping Classifications ? |
||
|
How is the current version of the Profibus-DP Configurator for S40 available ? |
||
|
Are the LE4-504-BT1 and PS416-NET441 PROFIBUS-DP slave modules certified by the Profibus User Organisation (PNO) and the Underwriter Laboratories (UL) ? |
||
|
What is the maximum number of slave stations that can be run with the LE4-504-BS1 (PROFIBUS-DP master) ? |
||
|
How many LE4-505-BS1 and CM4-505-GS1 AS-Interface masters can be connected to a PS4-... ? |
||
|
How many stations can be connected to an AS-Interface master LE4-505-BS1 and CM4-505-GS1 ? |
||
|
Can several telecontrol modules ZB4-501-TC2 be connected to a Suconet line ? |
||
|
Is it possible to implement an MV4 interface via Device Net ? |
||
|
Can several interface converters be connected to a Suconet line ? |
||
|
Which PLC types can be connected to the ZB4-501-UM4 ? |
||
|
What design measures are required to integrate an LE4-504-BT1 (PROFIBUS-DP Slave) in a STEP 7 hardware configuration? |
||
|
How can an MV4 touch panel be connected to a Siemens S7 PLC? |
||
|
How can PS4/PS416 systems be networked with PROFIBUS-FMS? |
||
|
How can the PS416 networked with PROFIBUS-PA? |
||
|
How are PS416 systems networked using the PS416-NET-400 Suconet K network card? |
||
|
To which PLC types can the ZB4-501-TC2 be connected ? |
||
|
How many stations can be connected to an AS-Interface master CM4-505-GV1 and CM4-505-GV2 ? |
||
|
Can the CoBox also be run on the Suconet (RS485) interface? |
||
|
Is there a software to support the PROFIBUS-DP link of the Easy control relay to the EASY204-DP module with a MOELLER control system PS4 / PS416 ? |
||
|
Can the PS4/PS416 communicate via Ethernet ? |
||
|
Which Moeller automation equipment has the Det Norske-Veritas (DNV) approval? |
||
|
Which MI4 Operator Panels are approved by the Underwriters Laboratories (UL) and for the Canadian market (C UL) ? |
||
|
Which connection cables are needed for SMS messaging with PS4/PS416 system ? |
||
|
Which device types are required and recommended for a dial-up line/GSM ? |
||
|
What is the application module required for data exchange between the PS40 controller via Ethernet? |
||
|
What hardware (PLC) can be used with the Positioning Toolbox ? |
||
|
What tasks can be implemented with the Positioning Toolbox version 2.00 ? |
||
|
Which hardware components are required for connecting a PS40 controller to an Ethernet network ? |
||
|
What is the name of the manual for AS-i Profibus-Gateways (CM4-505-GV1/GV2) ? |
||
|
What is the application module for Ethernet data coupling with the PS4-150/-200/-341 and PS416 ? |
||
|
Where can the S40-AM-... application modules be downloaded ? |
||
|
What is the name of the configuration software for the AS-i safety monitor? |
||
|
What are the type designations for the AS-i safety monitors: a) 1-channel; b) 2-channel? |
||
|
What is the correct course of action when diagnostics status message: ″ Unexpected Type ″ |
||
|
What is the name of the download cable for the safety configuration of the PC in the AS-i safety monitor? |
||
|
What is the name of the data exchange cable (SM - SM) of the safety configuration for one safety monitor to another safety monitor ? |
||
|
What is the name of the Excel file for outside temperature measurement in Bonn, incl. time and date? |
||
|
Is there any particular PLC required for AS-i safety control ? |
||
|
Is there an update for the closed-loop control toolbox ? |
||
|
What is the name of the documentation for the LON-LE (LE4-509-BS1) ? |
||
|
What pulse width modulation (PWM) functions are available in the RTT closed-loop control toobox (APP-RTT-E-GB) ? |
||
|
After a new configuration, the AS-Interface monitor cannot be switched to protection mode and signals the entry of an incorrect password. Why ? |
||
|
Can a safety slave (AS-Interface) be assigned to several safety monitors ? |
||
|
What reaction time can be reached with AS-Interface Safety at Work ? |
||
|
Can safety information be transferred via the AS-Interface ? |
||
|
Can a faulty safety AS-i slave exchanged without a new configuration of the safety monitor ? |
||
|
What options are available for implementing a fuzzy control system with a PS4 controller ? |
||
|
How can you program PS4- / PS416 controllers via Ethernet ? |
||
|
What is required to program PS4-.../PS416 controllers via Ethernet ? |
||
|
Does the S40-AM-TD; Version V2.0 application module contain any new functions for dial-up lines compared to version V1.x ? |
||
|
What new functions for leased-line communication does the S40-AM-TL Version V2.1 application module provide compared to Version V1.x ? |
||
|
Is it possible to connect more than 16 outstations to a telecontrol central station with PS4-341 (leased-line operation)? |
||
|
What is the simplest way of exchanging data (e.g. for visualisation) between a PLC and a PC? |
||
|
Is there a TÜV Certificate available for the AS-i Safety at Work ? |
||
|
What is the meaning of the humidity classes RH1 and RH2 in technical terminology ? |
||
|
What are the e-mail addresses for Product Support Automation from MOELLER GmbH ? |
||
|
Where can I get information on Moeller LON products ? |
||
|
Is there a software to support the PROFIBUS-DP link of the Easy control relay with the EASY204-DP module to the Siemens S7-300 ? |
||
|
Can DF5 and DV5 series frequency inverters be connected to PROFIBUS-DP? |
||
|
How do I implement the DeviceNet interfacing of an Easy 600 to a SLC 500 from Allen Bradley ? |
||
|
Which types of Easy starter packs are available ? |
||
|