Support

FAQ

22 entries found.


	What do I need to take into account when directly selecting setpoint values with MI4 units ?


	Information on this can be obtained by clicking the question.


	How do you enter Configuration mode on MI4 units if the ENTER key has been assigned a macro ?


	By means of special operations during the power-up


	How can I connect up an MI4 or MV4 unit via Sucosoft S30 ?


	Use the S30-AM-I40 application modu


	What settings are required to connect an MI4 to a PS4-341 via Suconet K ?


	a) Check MI4 configuration b) Check PLC Topology Configurator


	Is it possible to set the panel brightness of the MI4-471-TC1 touch panel ?


	Unfortunately not with this type !


	Is it possible to expand the memory of a MI4-471-TC1 Touch Panel with a 2 or 4 MByte memory ZB4-902-SF1 or ZB4904-SF1?


	Yes


	How can a message be printed out on MI4 display and operator systems?


	Information on this is provided in an application note that can be obtained free-of-charge from the Internet.


	How can an MI4 operator panel be connected to a Siemens S7 PLC?


	An MI4 operator panel can be connected to a Siemens S7 PLC via MPI.


	Is it possible to synchronize the time between several MI4 display and operator units?


	Yes! This is described in an application note that is available from the Internet.


	Is there any presentation material for the MI4-display and operating units ?


	Yes


	Is the software for configuring MI4 display and control devices compatible to Windows 2000 and Windows NT?


	Yes, from version 2.01


	Which MI4 Operator Panels are approved by the Underwriters Laboratories (UL) and for the Canadian market (C UL) ?


	You see table:


	Can masks used on MV4-xxx and MI4-xxx touch panels burn the display if they are displayed continuously over a long period ?


	Yes


	Can an MI4-140-KF1 (MI4 hand-held) be connected to an Siemens S7-300 / S7-400 via MPI ?


	Yes, MPI connections are supported.


	Is it possible to display only the alarm text in an MI4 - project and suppress the red Alarm LED in the event of a fault ?


	When creating the MI4 project in the MI4-CFG-1 software activate the following option: Project => Alarms => Message only


	What is the minimum quantity available for customized seals for the MI4 devices ?


	Please click on the question to obtain further information !


	Some MI4 units have keys are labelled with letters. How can these keys be accessed in the Keyboard Macro Editor?


	Please click on the question to obtain further information !


	How is the integrated alphabetical keyboard used on some MI4 devices?


	Please click on the question to obtain further information !


	What information is required for determining the layout costs for customized seals (logos) for MI4 or MV4 devices ?


	Please click on the question to obtain further information !


	Is it possible to write a macro in the MI4 Keyboard Macro Editor that is only run if two or more keys are pressed simultaneously ?


	Please click on the question to obtain further information !


	Can different macros be assigned to the same key for MI4 ?


	Please click on the question to obtain further information !


	Which MI4 operator and display units are no longer available?


	Please click on the question to obtain further information!