Support

FAQ

Search:
Find: or and Go  
21 entries found.

How do you exchange data via Profibus DP between a Moeller PLC with a CM4-504/LE4-504/PS416-NET-441 and a Siemens S7/C7?

  • Use Siemens system function SFC13/SFC14/SFC15.

How can you display I/O status information and other modules in the DP Configurator, and how do you force the outputs?

  • Click on the question to obtain information.

How can you connect a PROFIBUS-DP master and a PROFIBUS-DP slave to the PS4-341-MM1 together?

  • Click on the question to obtain information.

How much data can a PS416-NET-440 Profibus DP master card send to each station and how much can it receive ?

  • The PS416-NET-440 can receive 244 bytes and send 244 bytes.

On which PC operating systems does the PROFIBUS-FMS Configurator run ?

  • From version 3.3 or higher, MS-Windows 95, MS-Windows 98 and MS-Windows NT. Before this version, only MS-Windows 3.xx.

Is there a German version of the Profibus DP Configurator ?

  • Click on the question to obtain information.

How can consistent data be received with a Profibus DP master?

  • By adjustment of the consistent data length

What cable can be used for PROFIBUS-DP ?

  • Click the question to obtain the technical data of the cable.

How can large volumes of data be transferred via Suconet K or PROFIBUS-DP ?

  • The Suconet K/PROFIBUS-DP data multiplexer application module enables the transfer of large data volumes.

Is there a data multiplexer for Suconet-K / PROFIBUS-DP ?

  • Yes, the application module S40-AM-K1-GB contents a data multiplexer for Suconet-K / PROFIBUS-DP.

Which PS4 type can be equipped with the PROFIBUS-DP master module ?

  • Only the PS4-341-MM1.

How is the current version of the Profibus-DP Configurator for S40 available ?

  • Over download, please click on the question.

Are the LE4-504-BT1 and PS416-NET441 PROFIBUS-DP slave modules certified by the Profibus User Organisation (PNO) and the Underwriter Laboratories (UL) ?

  • Yes

What is the maximum number of slave stations that can be run with the
LE4-504-BS1 (PROFIBUS-DP master) ?

  • 124 Slaves

What design measures are required to integrate an LE4-504-BT1 (PROFIBUS-DP Slave) in a STEP 7 hardware configuration?

  • The design measures for integrating an LE4-504-BT1 (PROFIBUS-DP Slave) in a STEP 7 hardware configuration are shown in a video that can be downloaded.

How can an MV4 touch panel be connected to a Siemens S7 PLC?

  • An MV4 touch panel can be connected to a Siemens S7 PLC using PROFIBUS-DP.

How can PS4/PS416 systems be networked with PROFIBUS-FMS?

  • Different modules/cards are available for networking PS4/PS416 systems with PROFIBUS-FMS. Click the question to obtain further information.

How can the PS416 networked with PROFIBUS-PA?

  • The PS416 can be networked with PROFIBUS-PA using a segment coupler.

Is there a software to support the PROFIBUS-DP link of the Easy control relay to the EASY204-DP module with a MOELLER control system PS4 / PS416 ?

  • The S40-AM-K6-D/GB application module is provided for this purpose. Click the question to obtain the application module via the Internet.

Is there a software to support the PROFIBUS-DP link of the Easy control relay with the EASY204-DP module to the Siemens S7-300 ?

  • The S7-AM-K6-D/GB application module is provided for this purpose.

Can DF5 and DV5 series frequency inverters be connected to PROFIBUS-DP?

  • Yes