Support

FAQ

11 entries found.


	How can you connect the outputs in parallel on the LE4-116-DD1 and LE4-116-XD1?


	Only the outputs of the same driver should be connected in parallel.


	What temperature monitoring options are available with the PS4 / PS416 system?


	EM4-101-TX1, EM4-101-TX2 remote expansion modules and the PS4-271-MM1 PLC offer temperature measuring features.


	Does the Moeller automation product range include an SSI interface for absolute positioning encoders ?


	The LE4-633-CX1 local expansion module is available for this


	What is the successor of the EM4-101-AA1 ?


	The successor is the EM4-101-AA2


	Which PS4 type can be equipped with the PROFIBUS-DP master module ?


	Only the PS4-341-MM1.


	How can PS4 compact PLCs be expanded locally?


	The PS 4 compact PLCs are expanded with LE4-. . . expansion modules.


	Which LE4-... modules have a CSA approval (Status: November 2001) ?


	All the LE4-... modules which are in the Main Catalogue 2002: Automatisierungstechnik, Antriebstechnik have CSA approval.


	What is the permissible power supply range for the PS4-.../EM4-... and LE4-... devices ?


	With 24V power supply (DC), from 20.4 to 28.8 V With 115 to 230 V power supply (AC): from 98 to 264 V


	What is the correct course of action when diagnostics status message: ″ Unexpected Type ″


	Please check the version number, the version 01 or 03 and higher is o.k.


	How many inputs are available on the EM4-101-AA2 in Suconet K mode ?


	In Suconet K mode there is no restriction. All 4 voltage and 4 current inputs are available. The allocation to the input address is shown in table 4-24 in the documentation AWB27-1257D.


	What is the assignment of the four-wire terminal base module ZS 41.5/16 S/S/PE-+UI with the WINblock module DP-4AAI/UI ?


	Please click on the question to obtain further information.