|
easy 700/800 supports twelve/thirteen menu languages
|
|
easy, the linguist
If you can read a circuit diagram,
you will feel at ease with easy. Every schematic can be input
on a one-to-one basis on the display. The innovative unit
operates with make contacts, break contacts and coils –
just as you are accustomed to. All basic and special features
can be wired to one another – with a simple mouse click.
Just to make sure that there are no misunderstandings with
easy, the easy 500/700 features twelve menu languages and
the easy 800 even features thirteen menu languages.
|
|
|
Input contact "I1"
|
|
Input contact "I2"
|
 |
|
 |
Connect the contact and the coil |
|
Select relay coil "Q1" |
 |
|
|
easy operation
|
|
|
Each of the eight selection keys has a defined function. The selected action becomes active with the OK key. The user selects the action to be performed with the four up, down, left and right cursor keys. The ESC key negates the action and the DEL key erases an input. The ALT key is used for the connection lines in the circuit-diagram.
The circuit diagram is tested after it is input in the control relay. The current flow display indicates how the current flows in a contact during the test phase.
|
|
Simple to operate via eight function keys
|
|
easy saves space
|
|
There is enough space
everywhere for easy. The standard 45 mm size is suitable for use
in domestic distribution boards as well as in machine controls.
|
Enabling or inhibiting
access
|
|
easy is protected with
a password. You can use the password to selectively limit access
to the circuit diagram and parameters such as timing relay values
or time switch settings.
|
Additional remanance
|
|
It is not only circuits
and parameters which have to be safeguarded when there is a power
failure. ‘easy’ also remembers your switch positions
and values. The actual value on the counter and the elapsed time
on the timing relay can be recorded. easy500/700 features 4 excellent
zero-voltage safe hours-run meters. Up to 16 markers, 8 counters,
8 display texts and 6 timing relays can be operated with zero-voltage
safe actual values.
easy has an automatic
daylight saving time start/end facility for worldwide use. Simply
activate the checkbox to activate the feature and the easy will
automatically adjust the clock at the start and end of daylight
saving time. If there is no fixed rule in place for the start and
end date and time, any dates can be used – worldwide.
|
|
Here you find your application! |
| |
 |
Exchange information
with other users in the Easy-Forum!
|
| |
Note:
You will exit the moeller.net with this link. Moeller GmbH does
not assume any responsibility for the content and design of
the linked pages. |
|
